Comment entretenir et nettoyer mon malaxeur à action forcée ?

Please clean the mixer after every use.

Remember to remove the mixer arms when cleaning, to ensure that no material gets caught between the shaft/axel and the mixer arms.

BEWARE no electrical parts get water.

Also, remember to lubricate your machine on a regular basis.

If your mixer has been miskept, and a lot of hard material is stuck in the machine, it could be an idea to use EASY HAMMER or GEL HAMMER.

Special treatment when mixing with glue/resin:

When mixing with glue or resin, you can burn og clean with very hot water.
(Beware: only use steel blades for mixing resin/glue)
Sometimes the mixer gate becomes stuck when mixing resin/glue.It can be avoided if you clean with a soft brush and some white spirit in between every mix, but if it happens, you heat the gate with a hot airgun or a blow torch. When it has softened, you should be able to remove it with a metal wall paper scraper or the like.


Sådan rengør du din SoRoTo Tvangsblander